24-7 Locksmiths Ingersoll
24-7 Locksmiths Ingersoll will answer to your emergency call, even if it is in the middle of the night, and will come to your help. Our 24-7 Locksmiths Ingersoll are on call day and night, and will help you in minutes, arriving at your place in about 15 to 20 minutes. Call 24-7 Locksmiths Ingersoll for help with locks and doors today!
Replacing your interior doors, is an easy and effective way of renovating your home. After you have found the perfect interior doors to replace the old ones; you can easily install them yourself.
At any time of the day or night, you can call for our help and we come to your side fast.
Here are four quick and easy steps to install a new interior door. You will want to have the following tools: Screwdriver and Circular Saw (or Hand Plane); Combination Square. Drill with extra-long Phillips tip, 2 1/8 inch hole saw; 7/8 inch spade bit, Centering bit, Tape Measure; Hammer , Utility Knife, ¾ inch and 1 inch chisels.
The first and most obvious step is removing the old door. You will want to stand on the hinged side of the door and remove the pins. Start with the bottom hinge and work your way up. You may want to have someone to help you to hold the door; so it won’t topple over once you remove all the pins.
If a pin does not come out easily, you can tap it out gently using a hammer and/or screwdriver. Use the old door to figure out the size of the new door. Trace around the old door on the new one using a pencil to indicate where the new door will need to be trimmed. If you are using the old doorknob and hinges, take note of how they are pieced together.
Once you have the new door ready, use a scoring tool and straight edge to mark the edges. Use a circular saw to cut the new door down to size. Remember to leave room for clearance. Generally, you will want leave 1/8 inch around the top and sides of the door, and 5/8 inch under the bottom. Call 24-7 Locksmiths Ingersoll to help you with the door or its lock.
Recent Comments